Adaptive Reuse Projects: Retrofitting Older Buildings with Smart Glass
Why Adaptive Reuse Is Gaining Ground
Reusing an existing building’s structure avoids the carbon cost of producing new concrete and steel, which is where most of a building’s embodied emissions come from. A pilot study of a reused reinforced concrete structure in Southern Italy found that reusing exterior walls and roofs cut embodied carbon by roughly 64% compared to new construction. A separate review of adaptive reuse literature found embodied emissions reductions averaging 46%, with lifecycle emissions down about 19%. Gensler’s adaptation of a 1960s Denver telecom building into office space reportedly achieved a 68% reduction in embodied carbon compared to an equivalent new build.
The pattern holds across very different projects and building types: keeping a structure standing and upgrading it beats demolishing and starting over, at least on the embodied carbon side of the ledger.
The Envelope Problem: Why Glazing Is Often the Hardest Part
Operational performance is a separate challenge from embodied carbon, and glazing is usually where it gets hardest. A study of window retrofit strategy in a historic modern building noted that windows in these projects often can’t be altered in ways that change their historical appearance, which means retrofit measures need to work within the constraints of the original design rather than replacing it outright.
That constraint is common, not unusual. Patent filings on glazing retrofit systems note that roughly 40% of commercial and multi-family buildings in the US still have single-pane windows, and that replacing them with new high-performing glazing is often infeasible because of cost, construction disruption, and long payback periods. For a listed or heritage building, add preservation requirements on top of that, and full glazing replacement frequently isn’t an option at all.
Where Static Retrofit Glazing Falls Short
The standard toolkit for retrofitting old windows, secondary glazing, storm windows, slimline double glazing inserted behind the original sash, mainly targets thermal performance: reducing heat loss through the glazing’s U-value. A study of one such retrofit approach found it delivered up to a 25.99% reduction in monthly electrical energy consumption.
What these approaches don’t solve is solar heat gain and glare. A secondary glazing layer improves insulation, but a south-facing historic window with that upgrade can still overheat a room on a sunny afternoon, and the usual fix, interior blinds or curtains, changes the interior character of a space that adaptive reuse projects are often specifically trying to preserve.
How Dynamic Glazing Changes the Calculus
This is the gap dynamic glazing is positioned to close: solar heat gain and glare control built into the glazing itself, without adding visible mechanical shading to a space where the original window proportions and sightlines matter. ELM (Electrophoretic Light Modulation), eLstar Dynamics’ dynamic glazing technology, could in principle be incorporated within a secondary glazing retrofit or a new insulated unit, adding tint control without changing what the window looks like from outside, a real consideration for projects under heritage or listed-building review.
That said, this is a conceptual fit rather than a documented, standardized retrofit product configuration. Whether ELM can be integrated into a specific secondary glazing system, and what structural load or frame requirements that involves, depends on the existing window construction and needs to be worked through project by project with eLstar Dynamics’s technical team.
What to Check Before Specifying Smart Glass in a Reuse Project
A few things worth confirming early, before a retrofit glazing approach gets locked into a design:
- Frame and structural capacity. Older frames weren’t necessarily designed to carry the added weight of an insulated glazing unit with an electronic layer inside it.
- Heritage or listed-building consent requirements. Any change to a protected building’s fenestration, even one invisible from the street, typically needs approval from the relevant planning or preservation authority before installation.
- Electrical routing. Dynamic glazing needs a low-voltage connection, which has to be planned around the existing wall and window construction rather than assumed.
- How the retrofit interacts with existing thermal upgrades. If secondary glazing or storm windows are already part of the plan for U-value reasons, confirm early whether dynamic glazing can sit within that same retrofit layer or needs its own.
FAQ
Can dynamic glazing be added without replacing the entire window frame? In some cases, yes, depending on whether it can be incorporated into a secondary glazing or storm window retrofit rather than requiring full frame replacement. This needs to be assessed against the specific existing window construction.
Does adding smart glass affect a building’s heritage or listed status approval? It can, since most protected buildings require consent for any change to their windows, even one that doesn’t alter the exterior appearance. Confirming this with the relevant preservation authority early avoids delays later in the project.
Is dynamic glazing compatible with a secondary glazing retrofit approach? This depends on the specific system and the existing window’s construction. It’s a project-by-project question rather than a standard configuration, and worth confirming with eLstar Dynamics’s technical team before committing to a design.
Does adding dynamic glazing undercut the carbon savings from reusing a building? Not in a way that changes the overall picture. The embodied carbon savings from adaptive reuse come mainly from avoiding new structural materials like concrete and steel; a glazing upgrade is a much smaller share of a building’s total embodied carbon footprint.
Talk to eLstar Dynamics About Your Reuse Project
If you’re working through glazing options for an adaptive reuse or heritage retrofit project, get in touch with eLstar Dynamics to talk through what’s feasible for your building, or visit our Technology page to see how ELM works, or our Architects page for more on architectural applications.