What Happens to Smart Glass During a Power Outage?
The Answer Depends on the Technology, Not Just the Brand
There’s no single answer to what smart glass does when the power fails, because different dynamic glazing technologies are built around fundamentally different relationships with electricity. Some need power to stay clear. Some need power only to change state at all, and hold whatever state they’re in once the power is removed. Knowing which category a given product falls into matters more than any other single spec when a power outage is a real possibility.
Technologies That Need Continuous Power to Stay Clear
PDLC (Polymer Dispersed Liquid Crystal) and SPD (Suspended Particle Device) glass both work this way. In PDLC, liquid crystal droplets align under a continuous electrical field to let light through; remove the power, and the crystals relax back into their default scattered, opaque state. SPD works on a similar principle with suspended particles instead of liquid crystals: aligned and transparent with power applied, randomly scattered and opaque without it.
For both, the practical result is that the glass ends up in its lowest transmission state and is no longer clear. PDLC turns milky and diffuse, while SPD turns dark and absorbs light. That’s an important design consideration for any application where power reliability matters, since both technologies default to blocking light rather than letting it through.
Technologies That Hold Their State Without Power
Electrochromic glass generally works differently. Peer-reviewed research on and electrochromic smart windows describes electrochromic systems as typically requiring power only to change state, not to maintain one, meaning the glass simply stays as it was, clear or tinted, when the power cuts out, rather than snapping to a default.
This distinction is sometimes called bistability: a bistable system holds its current optical state indefinitely without power, only needing energy for the moments it’s actively transitioning between states.
Where ELM Fits, and What Isn’t Yet Confirmed
ELM (Electrophoretic Light Modulation) works by physically moving charged pigment particles under an electric field, a different mechanism from both the continuous-power PDLC/SPD category and electrochromic glass uses. That mechanical difference means ELM’s specific behavior during a power loss isn’t automatically the same as either category described above, and shouldn’t be assumed without direct confirmation.
This is worth being explicit about: we don’t have verified, publicly confirmed information about ELM’s exact behavior when power is interrupted, whether it holds its last state, defaults to a specific tint level, or something else. Any content published on this point should be checked directly with eLstar’s technical team rather than inferring it from how other electrophoretic or particle-based technologies typically behave.
Why This Matters for Specification
For a building or vehicle where a power interruption is realistic, from a grid outage, a vehicle electrical fault, or planned maintenance, knowing a glazing product’s power-loss behavior in advance changes what backup planning is actually needed. A product that fails to opaque might need a manual override for emergency egress visibility but may be limited in time due pending on the override principle. A product that holds its last state might need a special override depending on what state it happened to be in.
This is a legitimate question to ask any dynamic glazing supplier directly, and the answer should come from the manufacturer’s documentation rather than an assumption based on the general technology category.
FAQ
Does all switchable glass go dark when the power goes out? No. PDLC and SPD technologies typically default to opaque without power, but electrochromic glass is often bistable and holds whatever state it was in in the state it was already in. The behavior depends on the specific underlying mechanism, not on “smart glass” as a single category.
What does “bistable” mean for smart glass? A bistable technology holds its current optical state without needing continuous power, only requiring energy for the actual moment of switching between states. Electrochromic glass is commonly cited as an example of this behavior.
Should I ask a smart glass supplier about power-loss behavior before specifying a product? Yes. This is a legitimate technical question that depends on the specific product’s underlying mechanism, and a supplier should be able to confirm it directly rather than leaving it to assumption.
Is ELM bistable like electrochromic glass, or does it behave like PDLC? ELM’s particle-migration mechanism differs from both PDLC and electrochromic technology, so its specific power-loss behavior needs to be confirmed directly with eLstar rather than assumed from either comparison.
Have a Specific Application in Mind?
If power reliability is a factor in your project, get in touch with eLstar Dynamics to confirm ELM’s specific behavior for your use case, or visit our Technology page to see how ELM works.